ServicesWindow Replacement
Window Replacement in Seal Beach
We replace worn-out windows with new units built to your measured openings, sealed against water and air, and chosen by how long they last and what they ask of you over time. You see a clear comparison of options before anything is ordered.

When replacement is the right call
A window is a system: the frame, the sash, the insulated glass unit, the weatherstripping and the seal to the wall. When one part wears out early, you can sometimes live with it. When several are failing at once, or the frame itself is the problem, new windows cost less over the coming years than chasing each failure as it shows up.
Many homes in Seal Beach still have their original single-pane aluminum sliders. Salt air pits the aluminum, the bottom tracks corrode, and the thin metal frame passes heat and cold straight through. We show you what each replacement option costs now and what it will need from you later, so the choice still makes sense ten years from now.
We bring 30 years of window installation experience to that conversation, and we are an authorized Crystal Pacific Windows installer.
What a window replacement job includes
- Measuring every opening
- Older frames are rarely square, so we take three width readings and three height readings on each opening and size the new unit from the smallest of each. Every window is then made to fit its own opening, which keeps the perimeter gap even and the seal reliable.
- Retrofit or full-frame, explained
- A retrofit unit fits inside the existing frame and leaves stucco and interior trim alone. Full-frame replacement takes everything down to the rough opening, which lets us deal with rot and reflash the sill. We tell you which each opening needs and why, and our Window Retrofitting page covers that method in more detail.
- Matching the glass to the wall
- Two panes sealed around an argon-filled space, with a thin metallic low-E layer on one surface, block much of the solar heat that bakes a west or south wall. The room-side pane also stays closer to indoor temperature, so less condensation forms on it. We pick the coating for each elevation rather than using one package everywhere.
- Removal, setting and sealing
- Old sashes and frames come out, the opening is cleaned, and each new unit is set level and plumb on shims. Gaps get low-expansion foam inside and a flexible sealant outside so water sheds off instead of sitting against the frame.
- Cleanup and haul-away
- We cover floors near each opening and haul away the old glass and frames. Before we leave, we check with you that every sash opens, locks and seals.
How to tell your windows have worn out
Cloudy glass you can't wipe clean
A haze or droplets sitting inside the glass, where no cloth can reach, tells you the edge seal of the insulated unit has broken. The gas fill has leaked out, and the clouding tends to grow over time.
Sashes that grind or drop
Aluminum sliders that drag in a pitted track, or single-hung sashes that won't stay up because the balance has worn out, get harder to use each year. They also chew through weatherstripping and hardware faster.
Drafts and whistling
If you feel air at the meeting rail or hear wind around the frame, the weatherstripping and perimeter seal are spent. That gap lets dust and salt-laden air in and lets heated or cooled air out.
Stains below the sill
Water marks on the drywall under a window, or peeling paint on the stool, point to water getting past the frame. Left alone, it reaches the wall framing.
Wet, mildewed frames
Single-pane aluminum frames run cold on winter mornings, collect condensation and grow mildew along the sill. Insulated frames break that cold path.
From first visit to final check
- 1
Free in-home estimate
At your home we measure every window, probe the frames for rot or corrosion, and walk you through retrofit versus full-frame for each opening. The written estimate lists each window separately. There is no sales pressure or obligation.
- 2
Ordering to size
Once you choose, we order windows built to the measured sizes and glass you picked. We confirm the install date with you by phone.
- 3
Install day
We work one opening at a time, so each room is closed up and sealed before we move on to the next. Drop cloths stay down until the last window is in.
- 4
Final walk-through
We operate every sash and lock with you and check the exterior sealant line. We also cover basic care: keep the weep holes clear and rinse salt and sand out of the tracks a few times a year.

What moves the price of window replacement
The price depends on how many windows you replace, how they are built and what we find in the openings. We suggest weighing the number against how long the windows will last and what upkeep they need. A cheaper window that needs new rollers and reseals sooner often costs more in the end.
- Number and size of windows
- Larger panes and odd sizes cost more to build. Code also requires tempered glass near doors, tubs and floors, which adds to those units.
- Retrofit versus full-frame
- Full-frame work adds stucco cutting and patching, new interior trim and more labor per opening. Retrofit keeps those costs out when the existing frame is sound.
- Glass and frame options
- Low-E coatings, laminated glass for street noise, obscure glass for bathrooms and frame colors each change the price of a unit.
- Condition of the opening
- Rotted wood subframes, corroded fasteners or a damaged sill sometimes turn up during removal. We photograph what we find and talk it through with you before doing any added work.
- Access
- Second-story windows and tight side yards may call for ladders or staging, which adds setup time.
Window replacement questions
Something not covered here? (562) 554-7232
Is there a current price on window replacement?
Yes. We're replacing windows at $495 each with installation included free, on orders of four windows or more. Some glass sizes and products are excluded from that price. At the estimate we'll go through your openings and point out which ones qualify.
Will replacing my windows damage the stucco?
Retrofit windows install inside the existing frame, so the stucco stays as it is. Full-frame replacement does require cutting stucco around the opening, which we patch afterward. We recommend full-frame only when the old frame or sill is too far gone to support a retrofit.
I already have a quote. Can you beat it?
We'll beat a competing estimate from another licensed contractor or a USA-made window supplier. Have that estimate handy when we visit. We'll compare the same sizes, glass and installation method line by line so the numbers match up fairly.
How do you keep my home protected while the work is underway?
We lay drop cloths on the floor and cover furniture near each opening before the old window comes out. Only one opening is open at a time, and it is set and sealed before we start the next. That way no room sits exposed to wind, dust or an afternoon marine layer.
How long does the work take?
It depends on how many windows you replace and whether any need full-frame work. A retrofit job on a typical house often wraps up in one or two days, and full-frame openings take longer. We give you a realistic schedule with your estimate.
Do I need a permit to replace windows?
Many California cities require a building permit and energy compliance paperwork for window replacement. We tell you during the estimate whether your project needs one and take care of pulling it.
See your options side by side
We'll measure your windows, explain retrofit or full-frame for each opening, and lay out cost against lifespan so you can decide calmly. We also work in Long Beach, Huntington Beach and Rossmoor.