Skip to content

Bonded, insured, 30 years installing windows. Free estimate: (562) 554-7232

Seal Beach · Long Beach · Huntington Beach · Westminster

(562) 554-7232

ServicesSliding Door Replacement

Sliding Door Replacement in Seal Beach

When a sliding door drags, leaks air or won't latch, another set of rollers rarely fixes it for long. We remove the old unit down to the opening, flash the sill and set a new frame and panels that glide smoothly and seal tight.

Installer in gloves lifting an old sliding glass door panel from its frame on a concrete patio at the back of a stucco house, with a ladder and tool bag nearby

When a new sliding door is the right call

A sliding door is a system: a frame, a fixed panel, an operable panel, rollers riding on a track, and an interlock where the two panels meet. Once the track wears, the frame racks out of square or the glass seal fails, those parts stop working together. The drag, drafts and sticky lock you notice are symptoms of that.

We price a door by what it costs you over the years you own it, not just on install day. A vinyl or fiberglass frame with dual-pane Low-E glass costs more up front than a basic aluminum slider. It also holds its weatherstripping longer, resists corrosion and keeps more summer heat out of your home. We put both options side by side so the choice holds up.

Our crews bring 30 years of window installation experience to every door opening we take on. The company carries a bond and insurance coverage on each job.

What the replacement includes

Removal to the rough opening

We lift out the panels, cut the old frame free and pull it. With the opening bare, we check the framing and subfloor at the sill, where trapped water causes most rot.

Sill pan and flashing

Most slider leaks start at the sill, not the glass. We set a sloped sill pan or flexible flashing that drains water to the outside before the new frame goes in.

New frame, panels and hardware

You choose the frame material and finish. The new door comes with adjustable rollers, a fresh track and a lock that engages cleanly. We are an authorized Crystal Pacific Windows installer, so we can show you that lineup and how each frame holds up over time.

Tempered, energy-rated glass

Glass in a door has to break into small, blunt pieces, so the building code calls for tempered panels and we use them throughout. We pair that with dual-pane Low-E glass that satisfies California's Title 24 energy standards, which limits heat gain and slows fading on floors and furniture.

Trim, sealing and cleanup

We seal the perimeter, reset or replace interior and exterior trim, and haul the old door away. Floors get vacuumed before we leave.

Signs your sliding door needs replacing

  • The panel drags or jumps the track

    Worn rollers and a flattened track make the panel grind. If the track itself is dented or pitted, new rollers wear out fast on it.

  • Drafts at the interlock

    A whistle or cold line where the panels meet means the interlock weatherstrip is crushed or the frame has racked, so the panels no longer close tight.

  • Fog between the panes

    Moisture showing up inside dual-pane glass tells you the spacer seal around the unit has broken, letting humid air in and the gas fill out. That haze stays put no matter how you clean the surface.

  • Water at the sill after rain

    Water on the floor or soft flooring near the door points to failed sill flashing or a cracked frame corner.

  • Corroded aluminum track

    Salt air near the coast pits older aluminum tracks and hardware. Once corrosion roughens the track, the door fights you every time you open it.

  • A lock that won't engage

    When the latch only works after you push or raise the panel, the frame has gone out of square. The keeper has drifted away from the latch hook and no longer meets it.

How the job runs

  1. 1

    Free in-home estimate

    We measure the opening, check it for level and plumb, and look at the sill. Afterward you receive a written estimate that lists each part of the job, and the visit comes with no sales pressure or obligation.

  2. 2

    Ordering and permits

    Your door is built to the measured size. While it is made, we confirm the install date and pull a permit when the city requires one.

  3. 3

    Install day

    We lay floor protection, remove the old unit, prep and flash the sill, then set the new frame plumb, level and shimmed. A standard opening is usually closed up and locked by the end of the day.

  4. 4

    Adjustment and walkthrough

    We tune the rollers, test the glide, lock and screen. Before we go, we point out how sand and grit in the track grind down the wheels, and what a quick wipe-out every few weeks does to keep the panel rolling easily.

What moves the price of a sliding door

Every opening is different, so we quote only after measuring yours. Size, frame material and the condition under the old sill cause the biggest swings. We compare up-front cost with how long each option lasts and what upkeep it needs, so you can see the full picture before you choose.

Size and panel count
Price climbs with the width of the opening and the number of panels. Oversized doors and three- or four-panel units need heavier frames, more glass and more hands on install day.
Frame material
Basic aluminum is cheapest up front but conducts heat and corrodes sooner. Vinyl and fiberglass cost more and usually need less upkeep over time.
Glass package
Low-E coatings, tints and laminated glass for noise or security each add cost and change how much heat and sound come through.
Condition of the opening
Rotted subfloor at the sill, a resized opening or stucco that has to be cut and patched adds labor we price on the estimate.

Sliding door replacement questions

Something not covered here? (562) 554-7232

Is vinyl or aluminum better near the coast?

Vinyl and fiberglass do not corrode in salt air the way older aluminum does, and they insulate better. Modern aluminum frames are stronger and slimmer, which some homeowners want for very large panels. We will show you both and explain the upkeep each needs.

Do you have to cut my stucco?

Not always. Some doors can go in with a flush-fin frame that covers the old opening without disturbing the stucco. If the old frame is damaged or the opening needs resizing, a full-frame install with stucco cut and patch is the longer-lasting choice, and we will tell you which fits your door.

Will my home be open overnight?

No. We plan the job so the new door is set, sealed and locking before we leave for the day.

Do I need a permit?

Many cities require one for door replacement, especially when the size of the opening changes. We look up the rules that apply to your home and handle the permit ourselves if one is needed.

Can I switch from a slider to a wider opening?

Yes, in many homes. If you want the full opening clear, see our Multi-Folding Doors page; we can look at both options during the same estimate.

Get a sliding door that keeps working

We measure the opening, inspect the sill and show you each option next to its long-term cost. You decide on your own schedule, with nothing owed for the visit.